You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Tip For Installing Parts
Raymond Hornak, New Berlin, Wis.: “When installing parts – such as mounting a water pump on an engine – cut the heads off a couple bolts that are about a half inch longer than required. Lightly screw these ‘studs’ into place to hold gaskets in place and to serve as a lineup tool. After you put the other bolts in, rem
.......... You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Tip For Installing Parts FARM SHOP Miscellaneous Raymond Hornak New Berlin Wis : “When installing parts – such as mounting a water pump on an engine – cut the heads off a couple bolts that are about a half inch longer than required Lightly screw these ‘studs’ into place to hold gaskets in place and to serve as a lineup tool After you put the other bolts in remove the ‘studs’ To make removing them easier cut slots in the end so you can use a screwdriver to take them out “To keep batteries up to full charge on tractors or trucks parked for long periods of time I use solar chargers that provide a trickle charge It lets you park equipment anywhere without worrying about having electric power I buy the chargers at Northern Tool for about $30 apiece www northerntool com; ph 800 221-0516 ”
To read the rest of this story, download this issue below or click
here to register with your account number.